# This is a sample kickstart file. The values here probably won't be what # you want them to be for your install, and besides, they're all commented # out, so use this as a *template* for your kickstart file. # # H O W T O S E T U P A K I C K S T A R T I N S T A L L # # (Note: Kickstart installs are not available for Red Hat Linux/SPARC.) # # To begin a kickstart install, you must include the "ks" option on the Red # Hat Linux boot diskette's boot command. You can read the kickstart file # from diskette by using the boot command "linux ks=floppy" (For Red Hat # Linux/Intel only). In this case, the kickstart file will be read from # the diskette. It must be called ks.cfg, and must reside in the # diskette's root directory. # # If you want to do a kickstart'ed NFS install, you must have a bootp # server on your network, and it must have an entry for the machine you're # installing. The bootp server will be used to give the installing machine # its network information. It can also provide the location of the # machine's kickstart file. If this is done, an NFS mount on the kickstart # file's path is attempted, and the file is copied from there. # # The file, by default, is called -kickstart, in which # is the machine's IP address in "dotted decimal" notation. # # If the filename obtained from bootp ends with "/", it is interpreted as a # path. In this case, the default kickstart filename is used, relative to # the given path. # # If the filename obtained from bootp doesn't end with "/", then it is # interpreted as the name of the kickstart file, including the specified # path. # # If no filename is given, the default filename is used, and /kickstart/ is # used as the path. # # L A N G U A G E S P E C I F I C A T I O N (Required for upgrade) # # You must specify a language to be used for every kickstart install. To # specify a language, simply use the two-letter ISO language code, such as # "en" for English, "de" for German, "fr" for French, etc. # # Example: #lang en # # N E T W O R K C O N F I G U R A T I O N # # You may specify network configuration via one of three different methods: # # DHCP -- Use a dhcp server to obtain network configuration information. # BOOTP -- Use a bootp server to obtain network configuration information. # STATIC -- Use the network configuration information contained in the # kickstart file itself. # # Example: #network --bootproto dhcp # # For static network configuration, the following options are used: # # --ip -- Specify the desired IP address. # --netmask -- Specify the desired network mask. # --gateway -- Specify the desired gateway address. # --nameserver -- Specify the desired nameserver address. # # Example: #network --bootproto static --ip 10.0.2.15 --netmask 255.255.255.0 --gateway 10.0.2.254 --nameserver 10.0.2.1 # (Obviously, you'll want to change the addresses and netmask...) # (Note that this line may *not* be wrapped using the ol' backslash; it # must be strung out as one long line. And no, you can't specify more than # one nameserver...) # # I N S T A L L A T I O N M E T H O D (Required for upgrade) # # Kickstart installs can be performed using one of two methods: # # NFS -- Using an NFS server to obtain the distribution files. # CDROM -- Using a CDROM to obtain the distribution files. # # For NFS installs, use the --server option to specify the NFS server. # Note that it defaults to the server specified in the bootp response, or # to the bootp server itself, if the bootp response doesn't specify a # server. The --dir option is used to point to the top-level directory # containing the distribution files. # # Example: #nfs --server porkchop.redhat.com --dir /mnt/test/i386 # # For CDROM installs, just say, "cdrom". # # Example: #cdrom # # D E V I C E S P E C I F I C A T I O N (Required for upgrade) # # In this section, you can specify any device information required. # PCI cards can normally be autoprobed, so they don't need to be specified # here. # # To specify a device, start with the "device" keyword, followed by the # type of device: # # ethernet -- for ethernet cards. # # scsi -- for scsi cards. # # cdrom -- for non-scsi, non-ide cdrom cards (eg., sound cards with # proprietary CDROM interfaces). # # Optional parameters that are required by a device can also be specified # by using the --opts option. Enclose the paratmeters in quotes after # --opts. # # Note that you can specify multiple types of devices. For example, if you # know the machines you'll be kickstart-installing have either an Adaptec # 1542 or a Buslogic card, you can enter both in the kickstart file. But # be aware that the install uses only the first card found, so order the # device entries appropriately... # # Example: #device ethernet 3c509 --opts "io=0x330, irq=7" # # K E Y M A P S P E C I F I C A T I O N (Required for upgrade) # # Next, specify the keymap to use with your keyboard. The available keymap # types are listed in the kbdconfig program. # # Example: #keyboard us # # P A R T I T I O N S P E C I F I C A T I O N # # This is where you specify the partitions to be used in the install. # There are several sections that we'll cover in order. # # If you are doing a kickstart install on a new drive, the partition table # will likely corrupt. The zerombr command can be used to clear the # partition table if it is corrupt; otherwise it will take no action. In # order to clear the partition table, follow the zerombr command with # "yes"; if followed by "no", no action will be taken. # # Example: #zerombr yes # # The clearpart command is used to control which partitions are to be wiped # from all drives. Follow the clearpart command with "--all" to remove all # partitions from all drives, or "--linux" to remove all Linux-related # partitions (ie., partitions of type "Linux native" and "Linux swap") from # all drives. # # Example: #clearpart --linux # # Next, specify the partitions that you'd like to create. Partitions are # only created from free space available on the system. Enter one # partition per line using the following format: # # part --size [--grow] [--maxsize ] # # Where is the desired mount point for the partition (or "swap" for # swap partitions). Add "--grow" to create a partition that will grow to # fill all remaining space on the drive. To limit the affect of --grow, # you can add "--maxsize" followed by a size specification. # # Examples: #part / --size 250 #part swap --size 32 #part /usr --size 500 --grow --maxsize 800 #part /tmp --size 100 --grow # # I N S T A L L / U P G R A D E S P E C I F I C A T I O N (Required for upgrade) # # Here we specify whether an install or an upgrade is to be performed. # Enter "install" for a fresh install, and "upgrade" for an upgrade. # # Note: If you are doing an upgrade, you only need to specify the following # items in the kickstart file: # # Installation method # Device specification (if necessary) # Keymap specification # Install/upgrade specification (of course!) # LILO configuration # # Example: #install # # M O U S E S P E C I F I C A T I O N # # Enter the type of mouse here. Valid mouse types can be found by # running 'mouseconfig --help'. # # The default device is correctly set for busmice. /dev/cua0 is the # default for serial mice, but can be overridden with the "--device" # option. Follow it with the device name; for example, "cua2". If three # button emulation is needed, specify "--emulthree" # # Example: #mouse generic3ps/2 # # T I M E Z O N E S P E C I F I C A T I O N # # To specify the desired timezone, use the "timezone" command. Run # /usr/sbin/timeconfig to see all the valid timezone names. If you # computer's clock is set to GMT/UTC, add the --utc option. # # Example: #timezone --utc US/Eastern # # X W I N D O W S Y S T E M S P E C I F I C A T I O N # # Next, it's necessary to enter information related to X. In order to # properly configure X, the installation program will need to know about # your video card (or at least the X server it should use), and your # monitor (or at least your monitor's specifications). # # Video card selection: # # The installation program will normally find PCI video cards # automatically. However, you can specify the video card by adding the # --card option, followed by the card type. If you run Xconfigurator on a # Red Hat Linux system, and use the --help option, you'll get a list of all # valid card types. # # Alternatively, you can enter the name of the X server to be used by # adding the --server option, followed by the server type. Again, run # Xconfigurator --help to obtain a listing of all valid X servers. # # Monitor selection: # # Next, you'll need to specify your monitor. If no monitor information is # specified, the installation program assumes it it capable of operation at # 640x480@60hz. Otherwise, use the --monitor option, followed by the # monitor type. Xconfigurator --help lists all valid monitor types. # # Alternatively, you can enter the monitor's horizontal and vertical synch # rates using the --hsync and --vsync options. Each is followed by the # appropriate synch rate. The rates may be single numbers (representing # kilohertz and megahertz, as appropriate), groups of numbers separated by # commas, or two numbers separated by a dash (signifying a range). For # example: --hsync "31.5,35.5,50-65" --vsync "50-70" # # Example: #xconfig --server "Mach64" --monitor "tatung cm14uhe" # # R O O T P A S S W O R D # # This is where the root password for the freshly-installed system is # specified. Note that, for NFS kickstarts, this password goes over the # network in the clear. In that case, you can enter a pre-crypted password # (ie, one suitable for inclusion in /etc/passwd without further editing) # by using the --iscrypted option, followed by the crypted password. # #Example: #rootpw RHkickedme # # L I L O C O N F I G U R A T I O N (Required for upgrade) # # In this section you specify how LILO is to be configured. By default, # LILO will be installed in the master boot record, and will have no append # line for kernel boot-time options. You can modify this by using the # --location option to specify where LILO should be installed, and by using # the --append option to add an append line to /etc/lilo.conf. # # The --location option takes the following parameters: # # mbr -- Install LILO in the master boot record. # # partition -- Install LILO in the first sector of the root partition. # # none -- Do not install LILO (meaning you'd better have another way of # booting this system! # # (Note: There is no equivalent to this command on the Alpha.) # Example: #lilo --append "mem=128M" --location mbr # # P A C K A G E S P E C I F I C A T I O N # # In this section you can select the components and packages that are to be # installed. This section must be started with a line containing # "%packages". Component and/or package names then follow. Components are # preceded by "@ " (NOTE THE SPACE!), and packages appear as-is. # # To get a list of components and packages, refer to the file # RedHat/base/comps on the CD. The components in the file are preceded by # a number and a space, while the packages have no preceding characters. # # Example: #%packages #@ Networked Workstation #@ C Development #@ Web Server #@ X Window System #bsd-games # # New for 5.2 and later releases is the option to specify "Server" # or "Workstation". This installs the same package set as the # normal mode install for those two options. # # An example would be: # # %packages # @ Workstation # # # P O S T - I N S T A L L A T I O N C O M M A N D S # # This section must be the last in the kickstart file. It can contain # commands to be executed when the installation has completed. This # section must be started with a line containing "%post". Any lines after # this one will be executed as commands. # # You can access the network in a %post if it was previously configured, # but you don't have access to nameservice. So use IP addresses only. # # Example: #%post #echo "Kickstart-installed Red Hat Linux `/bin/date`" > /etc/motd