Those of you that have installed Red Hat Linux/Intel before and are in a hurry to
get started need only boot from a boot diskette (or the Red Hat Linux/Intel CD-ROM,
if your computer supports booting directly from CD-ROM). Next, select the
desired installation method. If you are installing from an FTP site, a
hard disk, or you'll be using a PCMCIA card during the installation, you'll
be prompted to insert a supplemental diskette
If you are attempting to install Red Hat Linux for either the Alpha or the SPARC, you really should read Chapter 2. It will refer you to information specific to your non-Intel-based system.